Follow

6K FAQs

6K FAQ's

Please see below for the frequently asked questions about the 6K cylindrical lock. If you would like a PDF copy of this file, please click here. For specification information or more information on the 6K, please see the catalog.

 

Q: What is the BEST 6K?

A: The 6K is a grade 2 medium duty cylindrical knob set that was introduced in 1990. There are no lever options for the 6K. The 6K cylindrical knob set and the 7KC cylindrical lever set share the same latch.

Q: What materials are used in the manufacturing of the BEST 6K?

A: All 6Ks are constructed of steel or brass, which contributes to the overall strength and durability of the lock. They do not contain weaker metals, like zinc or aluminum, commonly found in other cylindrical knob sets.

Q: What back sets are available for the 6K?

A: The 6K can be ordered with a 2 3/8”, 2 ¾”, 3 ¾”, or 5” back set dead locking latch. The standard latch front is 1” in width; however, a 1 1/8” latch front is available to order with the 2 ¾” back set. A drive-in latch is also available on 2 3/8” and 2 ¾” back sets.

Q: What functions are offered for the 6K?

A: The 6K is available in 5 single key functions (i.e., entry, office, storeroom, service station & classroom) and 7 keyless functions (i.e., passage, exit, privacy, hospital privacy, patio, single dummy trim & double dummy trim).

Q: Who is the 6K customer?

A: The 6K is a commonly used lock for non-ADA compliant applications, such as government and military facilities (i.e., barracks doors, base housing, etc.) as well as countries that do not require ADA compliance, such as Latin America.

Q: What knob styles are offered for the 6K?

A: The 6K has 2 knob styles – round & tulip.

Q: Do you have to specify handing when ordering a 6K lock?

A: The 6K has a reversible knob face. Once the core has been removed, one can simply take the knob face out and turn it around. This ensures the core does not appear upside down and eliminates the necessity to order a right-handed or lefthanded lock. (Please refer to the image above.)

Q: What rose styles are offered for the 6K?

A: The 6K is available in 2 rose styles (C: 2-9/16” & D: 3-3/8).

Q: What finishes are offered for the 6K?

A:&nbspThe 6K is available in 7 �finishes: Standard (626), Satin (606, 612, 613), and Bright (605, 611, 625).

Q: What cores must be used for the 6K?

A: Unlike competitive grade 2 cylindrical knob sets which only accept key in knob (KIK) cylinders, the 6K accepts any SFIC (Small Format Interchangeable Core).

Q: What door thickness range can the 6K accommodate? A: What door thickness range can the 6K accommodate?

A: The 6K comes preset from the factory to � t 1 ¾” thick doors but can be � eld adjusted to � t 1 3/8” – 1 7/8” thick doors.

Q: What is the lead time for a 6K?

A: The average lead time for a 6K is less than 2 weeks.

Q: What warranty does the 6K have?

A: The 6K has a 3 year warranty.

Q: How hard is it to install the 6K?

A: The 6K is very easy to install and can be done in a few minutes or less once the door is prepped. The 6K � ts the common cylindrical (161) door prep. The installation requires two screws which are used for the latch only. Once the latch is installed, one must simply slide the chassis through the 2 1/8” diameter hole and snap the inside knob onto the inside spindle.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.