Follow

5 Knuckle FBB Swing Clear Hinge Templates

5 Knuckle Plain Bearing “Swing Clear” Full Mortise - Standard Weight 

Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the 5 Knuckle Swing Clear Hinges, click here to visit the catalog.

For FAQ's and additional information on the FBB Series hinges, please click here.


Maintenance of F and FBB hinges
As a general rule, hinges are to be lubricated every six months. Use Shell Darina #2 or equivalent heavy bearing grease*. Wipe excess grease and dirt from hinge.

This is a general procedure and it should be recognized that high use of door openings or exterior applications may demand more frequent servicing.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.


F248 – (ANSI A8123) Steel – polished and plated or phosphated and prime coated for painting

For FAQ's and additional information on plain bearing "F Series" hinges, please click here.

                                 
Hinge Size  Template
F248 3 1/2"  T35-05 Full Mortise Swing-Clear Butt Hinges 3 1/2"
F248 4"  T40-05 Full Mortise Swing Clear Butt Hinge 4"

 

 5 Knuckle FBB "Swing Clear" Hinges - Standard Weight

Steel – polished and plated or phosphated and prime coated for painting

  • FBB248 – (ANSI A8122)
  • FBB258 – (ANSI A8122)

Stainless Steel – highly polished or satin finish

  • STSFBB248 – (ANSI A5122)
  • STSFBB258 – (ANSI A5122)

Hinge Size Template                                        
FBB248
STSFBB248
4 1/2" T45-30 Full Mortise Swing-Clear Butt Hinges 4.5

FBB258
STSFBB258

4 1/2" T45-35 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 4 1/2"

 

5 Knuckle FBB "Swing Clear" Hinges - Heavy Weight

Steel – polished and plated or phosphated and prime coated for painting

  • FBB268 – (ANSI A8121)
  • FBB278 – (ANSI A8121)
  • FBB269 – (ANSI A8421)
  • FBB264 – (ANSI A8221)
  • FBB274 – (ANSI A8221)
  • FBB266 – (ANSI A8321)

Stainless Steel – highly polished or satin finish

  • STSFBB268 – (ANSI A5121)
  • STSFBB278 – (ANSI A5121)
  • STSFBB269 – (ANSI A5421)
  • STSFBB264 – (ANSI A5221)
  • STSFBB274 – (ANSI A5221)
  • STSFBB266 – (ANSI A5321)
Hinge Size Template                                        
FBB268
STSFBB268
4 1/2" T45-31 Full Mortise Swing-Clear Butt Hinges 4.5
FBB268
STSFBB268
5" T50-05 Full Mortise Swing-Clear Butt Hinges 5

FBB278
STSFBB278

4 1/2" T45-36 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 4.5

FBB278
STSFBB278

5" T50-12 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 5

FBB269
STSFBB269

5" T50-85 Half Surface Swing-Clear Hinges 5

FBB264
STSFBB264

5" T50-45 Half Mortise Swing-Clear Hinges for Doors with Square Hinge Stiles 5

FBB274
STSFBB274

5" T50-47 Half Mortise Swing-Clear Hinges for Doors with Beveled Hinge Stiles 5

FBB266
STSFBB266

  T50-65 Full Surface Swing-Clear Hinge 5

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.