Follow

5 Knuckle Swing Clear Hinge Templates

5 Knuckle Plain Bearing “Swing Clear” Full Mortise - Standard Weight 

Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the "Swing Clear" hinges or specification information, please click on the link here to visit the website.


Maintenance of F and FBB hinges
As a general rule, hinges are to be lubricated every six months. Use Shell Darina #2 or equivalent heavy bearing grease*. Wipe excess grease and dirt from hinge.

This is a general procedure and it should be recognized that high use of door openings or exterior applications may demand more frequent servicing.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.


Steel – polished and plated or phosphated and prime coated for painting

  • F248 – (ANSI A8123) 

 

For FAQ's and additional information on the "F Series" hinges, please click on here.

                                 
Hinge Size  Template
F248 3 1/2"  T35-05 Full Mortise Swing-Clear Butt Hinges 3 1/2"
F248 4' T40-05 Full Mortise Swing-Clear Butt Hinge 4" 
F248 4 1/2"  T45-30 Full Mortise Swing-Clear Butt Hinges 4 1/2"

 

5 Knuckle Concealed Bearing “Swing Clear” Full Mortise - Standard Weight 

For FAQ's or additional information on the Concealed Bearing hinges, please click here.

Steel – polished and plated or phosphated and prime coated for painting

  • CB248 – (ANSI A8122)
  • CB258 – (ANSI A8122)

Stainless Steel – highly polished or satin finish

  • STSCB248 – (ANSI A5122)
  • STSCB258 – (ANSI A5122)
                                 
Hinge Size  Template
CB248
STSCB248
4 1/2"  T45-30 Full Mortise Swing-Clear Butt Hinges 4 1/2"

 

 5 Knuckle CB "Swing Clear" Hinges - Heavy Weight

Steel – polished and plated or phosphated and prime coated for painting

  • CB268 – (ANSI A8121)
  • CB278 – (ANSI A8121)
  • CB269 – (ANSI A8421)
  • CB264 – (ANSI A8221)
  • CB274 – (ANSI A8221)
  • CB266 – (ANSI A8321)

Stainless Steel – highly polished or satin finish                                   

  • STSCB268 – (ANSI A5121)
  • STSCB278 – (ANSI A5121)
  • STSCB269 – (ANSI A5421)
  • STSCB264 – (ANSI A5221)
  • STSCB274 – (ANSI A5221)
  • STSCB266 – (ANSI A5321)
Hinge Size Template                                        
CB268
STSCB268
4 1/2" T45-31 Full Mortise Swing-Clear Butt Hinges 4.5

CB268
STSCB268

5" T50-05 Full Mortise Swing-Clear Butt Hinges 5
CB278
STSCB278
4 1/2" T45-36 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 4 1/2"
CB278
STSCB278
5" T50-12 Full Mortise Swing-Clear Butt Hinges for Doors with Beveled Edge Hinge Stile 5
CB269
STSCB269
5" T50-85 Half Surface Swing-Clear Hinges 5
CB264
STSCB264
5" T50-45 Half Mortise Swing-Clear Hinges for Doors with Square Hinge Stiles 5
CB274
STSCB274
5" T50-47 Half Mortise Swing-Clear Hinges for Doors with Beveled Hinge Stiles 5
CB266
STSCB266
5" T50-65 Full Surface Swing-Clear Hinge 5

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.