Follow

5 Knuckle CB Half Surface Hinge Templates

5 Knuckle CB Half Surface Hinges - Standard Weight 

Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the 5 Knuckle Half Surface Hinges, click here to visit the website.

For additional information and FAQ's on the CB concealed bearing hinges, please click here.


Maintenance of CB 5 knuckle concealed bearing line of hinges
As required apply Shell Darina # 2, or equivalent grease at the non load bearing center hinge knuckle and pin*. Bearings do not have to be lubricated as they contain polytetrafluoroetheline.

Hinge surface should be kept clean. Use a soft damp cloth free of any chemicals that would harm the protective lacquer coating.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.


CB173 (ANSI A8412) Steel – polished and plated or phosphated and prime coated for painting

CB112 (ANSI A2412) Brass or bronze – polished and painted or plated

CB112 (32) (ANSI A5412) Stainless steel – highly polished

CB112 (32D) (ANSI A5412) Stainless steel – satin finish

                                                                                         
Hinge Size   Template
CB173
HTCB173
CB112
HTCB112
4"  T40-80 Half Surface Butt Hinges 4
CB173
HTCB173
CB112
HTCB112
4 1/2" T45-80 Half Surface Hinges 4.5
*CSCB173 4 1/2" T45-83 Half Surface Template Hinges With Concealed Switch
CB173
HTCB173
CB112
HTCB112
5" T50-80 Half Surface Hinges 5
*CSCB173 5" T50-83 Half Surface Template Hinges with Concealed Switch

 

 5 Knuckle CB Half Surface Hinges - Heavy Weight

CB163 (ANSI A8411) Steel – polished and plated or phosphated and prime coated for painting

CB113 (ANSI A2411) Brass or bronze – polished and plated or painted

CB113 (32) (ANSI A5411) Stainless steel – highly polished

CB113 (32D) (ANSI A5411) Stainless steel – satin finish

                                                                                          
Hinge Size Template
CB163
HTCB163
CB113
HTCB113
4 1/2" T40-80 Half Surface Butt Hinges 4
*CSCB163 4 1/2" T45-83 Half Surface Template Hinges With Concealed Switch
CB163
HTCB163
CB113
HTCB113
5" T45-80 Half Surface Hinges 4.5
*CSCB163 5" T50-83 Half Surface Template Hinges with Concealed Switch
CB163
HTCB163
CB113
HTCB113
6 "  T50-80 Half Surface Hinges 5

* No Longer Available. Template for Archived Purposes Only.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.