Follow

5 Knuckle Plain Bearing Hinge Templates

5 Knuckle Full Mortise Plain Bearing Hinges - Standard Weight 

Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the 5 Knuckle Plain Bearing Hinges, click here to visit the catalog.

For FAQ's and additional information on plain bearing "F Series" hinges, please click here.


Maintenance of F and FBB hinges
As a general rule, hinges are to be lubricated every six months. Use Shell Darina #2 or equivalent heavy bearing grease*. Wipe excess grease and dirt from hinge.

This is a general procedure and it should be recognized that high use of door openings or exterior applications may demand more frequent servicing.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.


F179 – (ANSI A8133 except for 3" x 3" ), Steel – polished and plated or phosphated and prime coated for painting

F191 – (ANSI A2133) Brass or bronze – polished and plated or painted

F191 (32) – (ANSI A5133) Stainless steel – polished

F191 (32D) – (ANSI A5133) Stainless steel – satin finish

                                                                                         
Hinge Size Template
F179
F191
3 1/2" T35-03 Full Mortise Butt Hinges 3.5 x 3 - 3.5 x 3.5 - 3.5 x 5 - 3.5 x 6
F179
F191
4"  T40-01 Full Mortise Butt Hinges 4 x 3.5 - 4 x 4 - 4 x 5 - 4 x 6 - 4 x 7
F179
F191
4 1/2" T45-01 Full Mortise Butt Hinges 4.5 x 4 - 4.5 x 4.5 - 4.5 x 5 - 4.5 x 6 - 4.5 x 7 - 4.5 x 8
F179
F191
5" T50-01 Full Mortise Butt Hinges 5 x 4 - 5 x 4.5 - 5 x 5 - 5 x 7 - 5 x 8

 

5 Knuckle Half Surface Plain Bearing Hinges - Standard Weight

F173 – (ANSI A8433) Steel – plated finishes or phosphated and prime coated for painting

 

                                                                            
Hinge Size Template
F173 4 1/2" T45-80 Half Surface Hinges 4.5

 

5 Knuckle Half Mortise Plain Bearing Hinges - Standard Weight

F167 – (ANSI A8233) Steel – polished and plated finishes or phosphated and prime coated for painting

 

                                                                            
Hinge Size Template
F167 4 1/2" T45-40 Half Mortise Hinges 4.5

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.