Follow

5 Knuckle CB Slip-In Hinge Templates

5 Knuckle CB Slip In Application A Hinges - Standard Weight 

Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the 5 Knuckle Full Surface Hinges, click here to visit the website.

“Slip-in” application A where one leaf of hinge is inserted through a slot in the door or the frame, and the other leaf mortised.


Maintenance of CB 5 knuckle concealed bearing line of hinges
As required apply Shell Darina # 2, or equivalent grease at the non load bearing center hinge knuckle and pin*. Bearings do not have to be lubricated as they contain polytetrafluoroetheline.

Hinge surface should be kept clean. Use a soft damp cloth free of any chemicals that would harm the protective lacquer coating.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.


CB179 – (ANSI A8152) Slip-in application “A”, steel – polished and plated or painted

CB191 – (ANSI A2152) Slip-in application “A”, brass or bronze – polished and plated or painted

CB191 (32) – (ANSI A5152) Slip-in application “A”, stainless steel – highly polished

CB191 (32D) – (ANSI A5152) Slip-in application “A”, stainless steel – satin finish

                                                                                         
Hinge Size Template
CB179
CB191
4" T40-02 Slip-In Full Mortise template Butt Hinges Application A 4X4
CB179
CB191
4 1/2" T45-04 Slip-In Full mortise Template Butt Hinges Application A 4.5X4 and 4.5X4.5

 

 5 Knuckle CB Slip In Application B Hinges - Heavy Weight

“Slip-in” application B where both leaves of hinge are inserted through slots in the door and the frame.

CB179 – (ANSI A8142) Slip-in application “B”, steel – polished and plated or painted

CB191 – (ANSI A2142) Slip-in application “B”, brass or bronze – polished and plated or painted

CB191 (32) – (ANSI A5142) Slip-in application “B”, stainless steel – highly polished

CB191 (32D) – (ANSI A5142) Slip-in application “B”, stainless steel – satin finish

                                                                                          
Hinge Size Template
CB179
CB191
4" T40-03 Slip-in Full Mortise Butt Hinge Application B 4 x 4
CB179
CB191
4 1/2" T45-05 Slip-in Full Mortise Butt Hinges Application B 4.5 x 4, 4.5 x 4.5

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.