Follow

What is the latest version of Wi-Q 3.1 software and controller and portal firmware?

Answer 

The latest release of Wi-Q 3.0 software is 3.1.07

The latest release of the Wi-Q portal Firmware is 3.1.0.103

WAC Controller firmware is currently at version 3.01.007

WDC & OMW Controller Firmware is currently at version 3.01.006

Applies To

Wi-Q 3.1 Software and Controller as well as Portal Gateway Firmware

Additional Information

To locate your version of software, look at the splash screen as the Configurator software application is opening. Also, you can look at the Help Menu and select the About option. below is a screen shot of the Wi-Q splash screen. The software version and build is listed in the upper right corner.

 

To locate the version of firmware you have, there are a few locations where this information can be obtained.

The portal gateway web page has this information listed.

 

Additionally, navigating to the portal gateway IP address in your browser will offer this information. 

To check the Controller Firmware, click on the Reader tab in the Configurator software and look at the Firmware Version associated with the Controllers. You will need to click on the facility name to see them all listed.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.