|STANLEY Commercial Hardware
QEL 200 Stand Alone Controller Firmware Update
STANLEY Security Distributors:
The STANLEY Security Products Engineering team is releasing an updated firmware package for the EL lock. This new firmware will incorporate a number of feature requests that are highlighted below.
Feature: Passage Mode Enhancement
Feature: Master Programming Enrollment Mode Enhancement
Resolution: In the past, a mechanical key was required to enter master programming card enrollment mode. Master programming card enrollment mode can now be entered by using either the mechanical key sequence or by using the Temp Operator card (shipped with each EL lock). Please consult the User Guide for detailed instructions.
Feature: Clearing Enrollment Mode by Presenting the Master Programming Card
The new firmware will be implemented into production on January 29, 2014. To clearly identify the firmware version, the box will come with a “Rev C” sticker.
Contact Information: 1-800-392-5209 option 1, option 2 or firstname.lastname@example.org
STANLEY Security - Products Group Technical Support
Additional Information Available for Download:
Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.