B.A.S.I.S Transport for the PDA version 1.06 & 1.07
B.A.S.I.S Transport for the PDA Version 1.06 & 1.07 is not supported on B.A.S.I.S installations newer than B.A.S.I.S ET 691.
Also, if you've received an Universal Controller Board, UVC board, you will need to upgrade to the latest release of BASIS Transport 184.108.40.206 HF1.
Although these PDA models have been discontinued by the manufacturer, they will still work if available and are still supported by Stanley. These PDA’s require B.A.S.l.S.® Transport Utility v 1.06 to operate.
(NOTE: PDA's with Windows Mobile 6.0 or higher will not work)
PDA's That Will Not Work with B.A.S.I.S Transport
- Dell (all models)
- HP iPAQ1910
PDA Replacement Parts
You may continue to use an existing PDA with your B.A.S.IS.® Offline Hardware. The PDA will continue to require the specific cables for that application. The most common part #’s are listed below.
- PDA USB/Serial Autosync Cable (HP model FAI22A#AC3 or equivalent) (Required only if a PDA is used)
- Offline Lock Programming Cable (BASD-CAB, purchase from Stanley/BEST)
Below are links to download the legacy B.A.S.I.S Transport Software and guide.
|BASIS Transport 1.06 Setup|
|BASIS Mobile 5.0 Hotfix 1.07|
|BASIS Offline Setup Guide|