Follow

Is there an easy way to set up multiple codes on multiple locks without manually inputting them?

Answer

Yes, use the facility autocodes feature of the OM500. You can set up a unique 6 digit facility code that will be plugged into an equation that will generate the same code for users 001-500.  When adding users, select the facility code you want and the codes will automatically be set up. As long as the same facility code is used in all of the locks. 

Applies To

45H

Additional Information

For additional information, please see the OM500UserManual.pdf attachment below. Page 95 of the printed document or 105 of the PDF will walk you through this process step by step.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither Stanley Security Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.